Homepage
The RCL07 call receiver has two channels. One channel is used for the operating modes and the switching functions. The second channel is activated when it receives an undervoltage telegram.

An LED lights up when the RCL07 receives a telegram from a call transmitter and the receiver switches according to the selected operating mode.

If the acknowledgment function is activated, receipt of an incoming call can be acknowledged using a programmed acknowledgment transmitter or directly on the RCL07.

In the maintenance function, the call function is blocked for 15 minutes.

The RCL07 is also able to analyze undervoltage telegrams signaling that the batteries in compatible radio transmitters are too low.

RCL07E5002B01-02K
Technical specifications
Coding Easywave
Up to 32 call transmitters, 8 acknowledgment transmitters and 8 switch transmitters can be programmed.
Frequency 868,30 MHz
Channels 2
Power supply 12-24 V DC
Power consumption 12V DC:
19 mA stand by
65 mA load (both relays are switched)

24 V DC:
11 mA stand by
31 mA Last load (both relays are switched)
Operating modes PULSE (1 second)
ON/OFF (2-button operation)
Functions call function
acknowledgment function
maintenance function
battery undervoltage analysis
Outputs 2 potential-free relay contacts
1x changeover contact: call
1x normally open contact: battery undervoltage
Maximum contact load DC: 30 V / 1 A / 30 W
Protection degree IP54 (with installed ø 5,30mm cable)
Operating temperature -20 °C to +60 °C
Dimensions 35 x 80 x 20 mm
Color white similar to RAL 9003
Scope of delivery
  • Call receiver
  • Operating manual
Models
Product numbers Description
RCL07E5002B01-02K Call receiver, Easywave, 12-24VDC, potential-free, IP54, batttery low, external programming, white
Wiring diagram